Epson CX9400Fax Waste Ink Counter Reset

Epson CX9400Fax Waste Ink Counter Reset

The Epson CX9400Fax is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX9400Fax uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson CX9400Fax Waste Ink Counter

Most Epson CX9400Fax waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson CX9400Fax Waste Ink Counter in 3 Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson CX9400Fax via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson CX9400Fax appears in the device list.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson CX9400Fax to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Petunjuk

Most Epson CX9400Fax waste counter resets finish in ~1–2 minutes.

System Requirements

  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson CX9400Fax – Waste Ink Counter Reset using Wic Reset Connect.

Keranjang Belanja