Epson B1100 Waste Ink Counter Reset

The Epson B1100 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson B1100 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson B1100 Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson B1100 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Bagaimana Kesalahan Muncul

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Step-by-Step: Epson B1100 Waste Counter Reset

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson B1100 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson B1100 appears in the device list.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson B1100.

Most Epson B1100 waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang

Jika Printer Tidak Terdeteksi

• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Jalankan aplikasi sebagai Administrator.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.