Model-specific reset guide
Canon TR8090 Ink Absorber Full Reset
The waste ink system in Canon TR8090 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
Before resetting Canon TR8090
The absorber pads collect ink generated during print-head cleaning. Canon TR8090 tracks those maintenance cycles in memory rather than measuring the pads directly.
Wic Reset Connect is designed to reset the compatible counter in Canon TR8090. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TR8090
- Turn the printer off.
- Tekan dan tahan Berhenti/Reset.
- Sambil menahan Stop/Reset, tekan dan tahan Daya.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5 kali.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TR8090
The counter reset normally takes only a few minutes after Canon TR8090 has entered service mode successfully.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TR8090 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TR8090 is not detected
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
- If the power light blinks, resolve the displayed cartridge, paper or mechanical error before trying service mode again.
- Connect Canon TR8090 directly to the computer and try another data-capable USB cable or port.
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
Canon TR8090 reset FAQ
Berapa kali saya harus menekan Stop/Reset?
For Canon TR8090, use 5 Stop/Reset presses in the sequence shown on this page.
Can I perform the reset over Wi-Fi?
No. Use a direct USB connection between the printer and a Windows computer.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon TR8090
Prepare Canon TR8090, enter service mode and complete the reset with a valid Wic Reset Connect key.