Fix Epson DX6050 Service Required – Waste Counter Reset

Epson DX6050 Waste Ink Counter Reset

The Epson DX6050 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson DX6050 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson DX6050 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson DX6050 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson DX6050 Printing

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson DX6050 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson DX6050.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson DX6050.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson DX6050 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC

FAQ

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson DX6050 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart