Fix Epson WF-2760 Service Required – Waste Counter Reset

Epson WF-2760 Waste Ink Counter Reset

When the Epson WF-2760 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2760 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson WF-2760 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-2760 waste counter reset in minutes.

Reset Epson WF-2760 Waste Ink Counter in 3 Steps

  1. 1. lépés: Connect Epson WF-2760 to a Windows computer with a stable Internet connection using a USB cable.
  2. 2. lépés: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2760.
  3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson WF-2760.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson WF-2760 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson WF-2760 – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi