Epson L3235 Waste Ink Counter Reset

The Epson L3235 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson L3235 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L3235 Waste Ink Counter

Most Epson L3235 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Reset Epson L3235 Waste Ink Counter in 3 Steps

1. 1. lépés: Connect Epson L3235 to a Windows computer with a stable Internet connection using a USB cable.
2. 2. lépés: Run Wic Reset Connect as Administrator and confirm Epson L3235 is detected.
3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson L3235.

Most Epson L3235 waste counter resets finish in ~1–2 minutes.

System Requirements

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.

Frequently Asked Questions