Epson ET-2718 Waste Ink Counter Reset

Epson ET-2718 Waste Ink Counter Reset

If your Epson ET-2718 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson ET-2718 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson ET-2718 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-2718 waste counter reset in minutes.

Three Steps to Restore Epson ET-2718 Printing

  1. 1. lépés: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2718 via USB (Wi-Fi reset is not supported).
  2. 2. lépés: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2718 appears in the device list.
  3. 3. lépés: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson ET-2718.
Buy Reset Key ⬇️ Download Wic Reset Connect Utasítás

Most Epson ET-2718 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2718 – Waste Ink Counter Reset using Wic Reset Connect.

Bevásárlókocsi