Epson XP-314 Waste Ink Counter Reset

If your Epson XP-314 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-314 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-314 Waste Ink Counter

Most Epson XP-314 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Kako se pogreška prikazuje

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Step-by-Step: Epson XP-314 Waste Counter Reset

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson XP-314 directly. Keep Internet enabled for validation.
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson XP-314 appears in the device list.
3. Korak 3: Unesite svoj ključ za resetiranje i pritisnite Ponovno pokretanje. Wait ~1–2 minutes, then restart Epson XP-314.

Most Epson XP-314 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Pokrenite aplikaciju kao administrator.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.