Reset Epson T50 Waste Ink Counter in Minutes

Epson T50 Waste Ink Counter Reset

If your Epson T50 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson T50 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson T50 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson T50 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Reset Epson T50 Waste Ink Counter in 3 Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson T50 via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson T50 appears in the device list.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson T50 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson T50 waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

If the Printer Is Not Detected

  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).

FAQ

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson T50 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart