Vodič za resetiranje specifičan za model

Epson L3289 Reset Waste Ink Counter

When Epson L3289 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Reset tipka$8,00
Trenutna dostava e-poštomTehnička podrška uključenaZamjenski ključ nakon neuspjelog resetiranja
Problem

Why the ink pad counter blocks Epson L3289

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson L3289 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson L3289. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.

Windows 7–11Računalo ili prijenosno računalo
Izravni USBBez Wi-Fi-ja ili USB koncentratora
InternetZa provjeru ključa
Reset tipkaZa ovaj postupak
Korak po korak

Reset the counter in Epson L3289

The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.

  1. Instalirajte izvorni upravljački program

    Install the official Epson driver for L3289 and confirm that Windows can see the printer.

  2. Povežite izravno putem USB-a

    Connect Epson L3289 to the computer without Wi-Fi, a hub or an adapter.

  3. Pokrenite Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3289.

  4. Unesite ključ i resetirajte

    Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.

Ispravno dovršite: Do not disconnect the cable while the reset is running. Restart Epson L3289 only after Wic Reset Connect reports that the operation is complete.
If Epson L3289 is not detected
  • Obrišite pauzirane zadatke ispisa i ponovno pokrenite pisač i Windows ako neki drugi program zauzima USB vezu.
  • Ako pisač nije prepoznat, pokušajte s drugim USB priključkom i provjerenim USB kabelom koji podržava prijenos podataka.
  • Install the original Epson driver for L3289; a generic Windows driver may not expose the required communication interface.
  • Zatvorite Epson Status Monitor i bilo koji drugi Epson softver za održavanje prije pokretanja Wic Reset Connect.

Otvori potpune upute

Česta pitanja

Epson L3289 reset FAQ

Čisti li se resetiranjem spremnik s tintom ili se on zamjenjuje?

Ne. Mijenja se pohranjena vrijednost brojača. Pregledajte, očistite ili zamijenite fizički sustav za otpadnu tintu kada to njegovo stanje zahtijeva.

Can I reset Epson L3289 over Wi-Fi?

Ne. Wic Reset Connect zahtijeva izravnu USB vezu s računalom sa sustavom Windows.

Što ako prvi pokušaj resetiranja ne uspije?

Najprije riješite problem s upravljačkim programom ili USB komunikacijom. Ako je ključ iskorišten, upotrijebite generator novog ključa ili kontaktirajte podršku.

Resetirajte s povjerenjem

Restore Epson L3289

Follow the verified sequence for Epson L3289, then restart the printer and continue your work.

Ključ za resetiranje: $8,00
Shopping Cart
Odaberite svoju valutu