Vodič za resetiranje specifičan za model

Epson L3213 Reset Waste Ink Counter

When Epson L3213 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

Reset tipka$8,00
Trenutna dostava e-poštomTehnička podrška uključenaZamjenski ključ nakon neuspjelog resetiranja
Problem

Why the ink pad counter blocks Epson L3213

Every cleaning cycle sends a small amount of ink to the waste ink system. Epson L3213 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.

Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Epson L3213. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.

Windows 7–11Računalo ili prijenosno računalo
Izravni USBBez Wi-Fi-ja ili USB koncentratora
InternetZa provjeru ključa
Reset tipkaZa ovaj postupak
Korak po korak

Reset the counter in Epson L3213

The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.

  1. Instalirajte izvorni upravljački program

    Install the official Epson driver for L3213 and confirm that Windows can see the printer.

  2. Povežite izravno putem USB-a

    Connect Epson L3213 to the computer without Wi-Fi, a hub or an adapter.

  3. Pokrenite Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson L3213.

  4. Unesite ključ i resetirajte

    Unesite kupljeni ključ, odaberite Reset i ostavite pisač povezan do završetka postupka.

Ispravno dovršite: After the program confirms completion, close it, turn Epson L3213 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson L3213 is not detected
  • Obrišite pauzirane zadatke ispisa i ponovno pokrenite pisač i Windows ako neki drugi program zauzima USB vezu.
  • Install the original Epson driver for L3213; a generic Windows driver may not expose the required communication interface.
  • Zatvorite Epson Status Monitor i bilo koji drugi Epson softver za održavanje prije pokretanja Wic Reset Connect.
  • Pokrenite Wic Reset Connect kao administrator i tijekom cijele provjere održavajte aktivnu internetsku vezu.

Otvori potpune upute

Česta pitanja

Epson L3213 reset FAQ

Does Epson L3213 need service mode?

Ne. Pisači Epson ne koriste sekvencu servisnog načina rada Canon. Povežite pisač uobičajeno putem USB-a.

Što ako prvi pokušaj resetiranja ne uspije?

Najprije riješite problem s upravljačkim programom ili USB komunikacijom. Ako je ključ iskorišten, upotrijebite generator novog ključa ili kontaktirajte podršku.

Čisti li se resetiranjem spremnik s tintom ili se on zamjenjuje?

Ne. Mijenja se pohranjena vrijednost brojača. Pregledajte, očistite ili zamijenite fizički sustav za otpadnu tintu kada to njegovo stanje zahtijeva.

Resetirajte s povjerenjem

Restore Epson L3213

Complete the Epson L3213 counter reset with Wic Reset Connect and assistance whenever you need it.

Ključ za resetiranje: $8,00
Shopping Cart
Odaberite svoju valutu