Epson ET-1811 Waste Ink Counter Reset

If your Epson ET-1811 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-1811 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-1811 Waste Ink Counter

Posjet servisu je često nepotrebno. Wic Reset Connect allows a safe Epson ET-1811 waste counter reset in minutes.

Tipični znakovi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson ET-1811 Printing

1. Korak 1: Connect Epson ET-1811 to a Windows computer with a stable Internet connection using a USB cable.
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson ET-1811 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson ET-1811 to finalize.

Most Epson ET-1811 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Pokrenite aplikaciju kao administrator.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.

Često postavljana pitanja