Vodič za resetiranje specifičan za model
Canon MX876 Ink Absorber Full Reset
Canon MX876 may block print jobs after recording enough cleaning and maintenance cycles. Use the sequence below to enter service mode and reset the stored value.
Why Canon MX876 reports an absorber error
Cleaning operations send unused ink into absorber pads inside the printer. Canon MX876 estimates their usage with an electronic counter and can lock printing when that value reaches its limit.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon MX876. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon MX876
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon MX876
Service mode must be entered correctly before Wic Reset Connect can communicate with the maintenance interface. Resolve other printer errors first.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon MX876 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon MX876 is not detected
- Connect Canon MX876 directly to the computer and try another data-capable USB cable or port.
- Ako lampica napajanja treperi, riješite prikazanu pogrešku uloška, papira ili mehanike prije ponovnog pokušaja servisnog načina rada.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Zatvorite uslužne programe za održavanje Canon i obrišite pauzirane poslove ispisa prije otvaranja Wic Reset Connect.
Canon MX876 reset FAQ
Koliko puta trebam pritisnuti Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Čisti li resetiranje apsorber tinte?
Ne. Ono resetira pohranjeni brojač. Pregledajte, očistite ili zamijenite jastučiće apsorbera kada njihovo fizičko stanje zahtijeva održavanje.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon MX876
Prepare Canon MX876, enter service mode and complete the reset with a valid Wic Reset Connect key.