Vodič za resetiranje specifičan za model
Canon MX525 Ink Absorber Full Reset
Canon MX525 can stop printing when its internal ink absorber counter reaches a programmed threshold. Follow the model-specific preparation below before using Wic Reset Connect.
What stops Canon MX525 from printing
The lock is based on accumulated maintenance activity. Resetting Canon MX525 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon MX525. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon MX525
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon MX525
Check cartridges, close Canon utilities and connect the printer directly to Windows before beginning the reset.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon MX525 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon MX525 is not detected
- Ako lampica napajanja treperi, riješite prikazanu pogrešku uloška, papira ili mehanike prije ponovnog pokušaja servisnog načina rada.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Connect Canon MX525 directly to the computer and try another data-capable USB cable or port.
- Ako Windows ne otkrije uređaj u servisnom načinu rada, ponovno pokrenite pisač uobičajeno, pričekajte 10 sekundi i ponovite pripremu.
Canon MX525 reset FAQ
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Does Canon MX525 require service mode?
Da. Pisač mora omogućiti svoje sučelje za održavanje prije nego što se brojač može resetirati pomoću Wic Reset Connect.
Koliko puta trebam pritisnuti Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Restore Canon MX525
Prepare Canon MX525, enter service mode and complete the reset with a valid Wic Reset Connect key.