Vodič za resetiranje specifičan za model
Canon MX514 Ink Absorber Full Reset
If Canon MX514 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
The waste ink counter inside Canon MX514
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon MX514 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon MX514. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon MX514
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon MX514
The counter reset normally takes only a few minutes after Canon MX514 has entered service mode successfully.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon MX514 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon MX514 is not detected
- Zatvorite uslužne programe za održavanje Canon i obrišite pauzirane poslove ispisa prije otvaranja Wic Reset Connect.
- Connect Canon MX514 directly to the computer and try another data-capable USB cable or port.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Ako Windows ne otkrije uređaj u servisnom načinu rada, ponovno pokrenite pisač uobičajeno, pričekajte 10 sekundi i ponovite pripremu.
Canon MX514 reset FAQ
Mogu li resetiranje izvršiti putem Wi-Fi-ja?
Ne. Upotrijebite izravnu USB vezu između pisača i računala sa sustavom Windows.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Čisti li resetiranje apsorber tinte?
Ne. Ono resetira pohranjeni brojač. Pregledajte, očistite ili zamijenite jastučiće apsorbera kada njihovo fizičko stanje zahtijeva održavanje.
Restore Canon MX514
Complete the Canon MX514 absorber counter reset in a few carefully prepared steps.