Vodič za resetiranje specifičan za model
Canon MX477 Ink Absorber Full Reset
When Canon MX477 reports that the ink absorber is full, turning it off and on will not normally remove the lock. The printer must be prepared correctly and its counter reset.
Understanding the Canon MX477 ink absorber warning
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon MX477 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon MX477. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon MX477
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon MX477
Service mode must be entered correctly before Wic Reset Connect can communicate with the maintenance interface. Resolve other printer errors first.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon MX477 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon MX477 is not detected
- Connect Canon MX477 directly to the computer and try another data-capable USB cable or port.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Ako Windows ne otkrije uređaj u servisnom načinu rada, ponovno pokrenite pisač uobičajeno, pričekajte 10 sekundi i ponovite pripremu.
- Ako lampica napajanja treperi, riješite prikazanu pogrešku uloška, papira ili mehanike prije ponovnog pokušaja servisnog načina rada.
Canon MX477 reset FAQ
Mogu li resetiranje izvršiti putem Wi-Fi-ja?
Ne. Upotrijebite izravnu USB vezu između pisača i računala sa sustavom Windows.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Does Canon MX477 require service mode?
Da. Pisač mora omogućiti svoje sučelje za održavanje prije nego što se brojač može resetirati pomoću Wic Reset Connect.
Restore Canon MX477
Prepare Canon MX477, enter service mode and complete the reset with a valid Wic Reset Connect key.