Vodič za resetiranje specifičan za model
Canon IX6830 upijač tinte – potpuno resetiranje
The waste ink system in Canon IX6830 collects ink used during cleaning cycles. Once the estimated limit is reached, service mode and a compatible counter reset may be required.
Why Canon IX6830 reports an absorber error
Canon IX6830 uses a stored counter as a maintenance safeguard. Reaching the threshold can produce an Ink Absorber Full, Service Required or related support-code message.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon IX6830. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon IX6830
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon IX6830
The counter reset normally takes only a few minutes after Canon IX6830 has entered service mode successfully.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon IX6830 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon IX6830 is not detected
- Ako lampica napajanja treperi, riješite prikazanu pogrešku uloška, papira ili mehanike prije ponovnog pokušaja servisnog načina rada.
- Ako Windows ne otkrije uređaj u servisnom načinu rada, ponovno pokrenite pisač uobičajeno, pričekajte 10 sekundi i ponovite pripremu.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Zatvorite uslužne programe za održavanje Canon i obrišite pauzirane poslove ispisa prije otvaranja Wic Reset Connect.
Canon IX6830 reset FAQ
Mogu li resetiranje izvršiti putem Wi-Fi-ja?
Ne. Upotrijebite izravnu USB vezu između pisača i računala sa sustavom Windows.
Koliko puta trebam pritisnuti Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon IX6830
Complete the Canon IX6830 absorber counter reset in a few carefully prepared steps.