Vodič za resetiranje specifičan za model
Canon iP7240 Ink Absorber Full Reset
An absorber warning on Canon iP7240 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
What stops Canon iP7240 from printing
The lock is based on accumulated maintenance activity. Resetting Canon iP7240 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon iP7240. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon iP7240
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon iP7240
The counter reset normally takes only a few minutes after Canon iP7240 has entered service mode successfully.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon iP7240 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon iP7240 is not detected
- Zatvorite uslužne programe za održavanje Canon i obrišite pauzirane poslove ispisa prije otvaranja Wic Reset Connect.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Ponovite slijed tipki u ujednačenom ritmu; prerano otpuštanje tipke za napajanje čest je razlog neuspješnog ulaska u servisni način rada.
- Ako Windows ne otkrije uređaj u servisnom načinu rada, ponovno pokrenite pisač uobičajeno, pričekajte 10 sekundi i ponovite pripremu.
Canon iP7240 reset FAQ
Koliko puta trebam pritisnuti Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Čisti li resetiranje apsorber tinte?
Ne. Ono resetira pohranjeni brojač. Pregledajte, očistite ili zamijenite jastučiće apsorbera kada njihovo fizičko stanje zahtijeva održavanje.
Restore Canon iP7240
Wic Reset Connect combines a guided reset with support if Canon iP7240 does not respond as expected.