Vodič za resetiranje specifičan za model
Canon iP4990 Ink Absorber Full Reset
If Canon iP4990 displays an ink absorber full or service-required warning, the stored waste ink counter may have reached its limit. This guide covers service mode, USB preparation and the reset itself.
What stops Canon iP4990 from printing
Waste ink is routed away from the print head and retained inside the printer. The firmware in Canon iP4990 calculates usage and may stop new jobs to reduce overflow risk.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon iP4990. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon iP4990
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon iP4990
Check cartridges, close Canon utilities and connect the printer directly to Windows before beginning the reset.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon iP4990 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon iP4990 is not detected
- Ako Windows ne otkrije uređaj u servisnom načinu rada, ponovno pokrenite pisač uobičajeno, pričekajte 10 sekundi i ponovite pripremu.
- Connect Canon iP4990 directly to the computer and try another data-capable USB cable or port.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
- Zatvorite uslužne programe za održavanje Canon i obrišite pauzirane poslove ispisa prije otvaranja Wic Reset Connect.
Canon iP4990 reset FAQ
Mogu li resetiranje izvršiti putem Wi-Fi-ja?
Ne. Upotrijebite izravnu USB vezu između pisača i računala sa sustavom Windows.
Does Canon iP4990 require service mode?
Da. Pisač mora omogućiti svoje sučelje za održavanje prije nego što se brojač može resetirati pomoću Wic Reset Connect.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Restore Canon iP4990
Prepare Canon iP4990, enter service mode and complete the reset with a valid Wic Reset Connect key.