Vodič za resetiranje specifičan za model
Canon iP2770 Ink Absorber Full Reset
When Canon iP2770 reports that the ink absorber is full, turning it off and on will not normally remove the lock. The printer must be prepared correctly and its counter reset.
What the Canon iP2770 service message means
The lock is based on accumulated maintenance activity. Resetting Canon iP2770 changes the counter value but does not remove ink already held in the absorber material.
Wic Reset Connect osmišljen je za resetiranje kompatibilnog brojača u Canon iP2770. Fizički sustav otpadne tinte i dalje treba pregledati i održavati kada je to potrebno.
Enter service mode on Canon iP2770
The Stop/Reset press count varies across Canon series. Use the complete service-mode guide and select the procedure for this printer instead of guessing.
Reset the counter in Canon iP2770
The counter reset normally takes only a few minutes after Canon iP2770 has entered service mode successfully.
-
Pripremite pisač
Resolve other errors, confirm a steady power light and enter service mode using the linked guide.
-
Povežite izravno putem USB-a
Connect Canon iP2770 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Pokrenite Wic Reset Connect
Pokrenite program kao administrator i pričekajte da se otkrije uređaj u servisnom načinu rada Canon.
-
Unesite ključ i resetirajte
Unesite kupljeni ključ, odaberite Reset i držite pisač povezanim dok se ne pojavi potvrda.
If Canon iP2770 is not detected
- Ako lampica napajanja treperi, riješite prikazanu pogrešku uloška, papira ili mehanike prije ponovnog pokušaja servisnog načina rada.
- Ponovite slijed tipki u ujednačenom ritmu; prerano otpuštanje tipke za napajanje čest je razlog neuspješnog ulaska u servisni način rada.
- Zatvorite uslužne programe za održavanje Canon i obrišite pauzirane poslove ispisa prije otvaranja Wic Reset Connect.
- Pokrenite Wic Reset Connect kao administrator i zadržite aktivan pristup internetu radi provjere ključa.
Canon iP2770 reset FAQ
Čisti li resetiranje apsorber tinte?
Ne. Ono resetira pohranjeni brojač. Pregledajte, očistite ili zamijenite jastučiće apsorbera kada njihovo fizičko stanje zahtijeva održavanje.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Koliko puta trebam pritisnuti Stop/Reset?
The correct count depends on the printer series. Use the linked Canon service-mode guide and do not guess.
Restore Canon iP2770
Wic Reset Connect combines a guided reset with support if Canon iP2770 does not respond as expected.