Epson XP-7100 Waste Ink Counter Reset
The Epson XP-7100 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-7100 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson XP-7100 Ink Pad Counter Warning?
With Wic Reset Connect, you can reset the Epson XP-7100 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Typical Signs
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Step-by-Step: Epson XP-7100 Waste Counter Reset
- Étape 1 : Connect Epson XP-7100 to a Windows computer with a stable Internet connection using a USB cable.
- Étape 2 : Start Wic Reset Connect in Administrator mode and wait until Epson XP-7100 appears in the device list.
- Étape 3 : Paste the reset key, click Reset, and after completion power-cycle Epson XP-7100.
Most Epson XP-7100 waste counter resets finish in ~1–2 minutes.
Before You Begin
- Windows 7/8/10/11 PC
- Valid Wic Reset Connect reset key
- USB connection required (Wi-Fi reset not supported)
- Stable Internet connection during reset
Troubleshooting
- Run the app as Administrator.
- Use a direct USB connection (avoid hubs).
- Temporarily disable VPN/proxy if validation fails.
- Restart printer and PC, then try again.
- Try another USB cable (some cables are charge-only).
FAQ
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Guide prepared for Epson XP-7100 – Waste Ink Counter Reset using Wic Reset Connect.