Fix Epson XP-225 Service Required – Waste Counter Reset

Epson XP-225 Waste Ink Counter Reset

The Epson XP-225 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson XP-225 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson XP-225 Waste Ink Counter

Most Epson XP-225 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson XP-225 Waste Counter Reset

  1. Étape 1 : Connect Epson XP-225 to a Windows computer with a stable Internet connection using a USB cable.
  2. Étape 2 : Run Wic Reset Connect as Administrator and confirm Epson XP-225 is detected.
  3. Étape 3 : Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-225.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-225 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.

Guide prepared for Epson XP-225 – Waste Ink Counter Reset using Wic Reset Connect.

Panier