Epson CX7400 Waste Ink Counter Reset
The Epson CX7400 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson CX7400 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why the Epson CX7400 Stops Printing (Waste Counter Limit)
A service visit is often unnecessary. Wic Reset Connect allows a safe Epson CX7400 waste counter reset in minutes.
Typical Signs
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Reset Epson CX7400 Waste Ink Counter in 3 Steps
- Étape 1 : Use a Windows PC (7–11) with Internet access. Connect Epson CX7400 via USB (Wi-Fi reset is not supported).
- Étape 2 : Open Wic Reset Connect with admin privileges and verify device recognition for Epson CX7400.
- Étape 3 : Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson CX7400.
Most Epson CX7400 waste counter resets finish in ~1–2 minutes.
Before You Begin
- USB connection required (Wi-Fi reset not supported)
- Stable Internet connection during reset
- Valid Wic Reset Connect reset key
- Windows 7/8/10/11 PC
Common Fixes
- Run the app as Administrator.
- Use a direct USB connection (avoid hubs).
- Close Epson Status Monitor or other printer utilities.
- Temporarily disable VPN/proxy if validation fails.
- Try another USB cable (some cables are charge-only).
FAQ
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Guide prepared for Epson CX7400 – Waste Ink Counter Reset using Wic Reset Connect.