Epson EP-902A Waste Ink Counter Reset

The Epson EP-902A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson EP-902A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson EP-902A Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson EP-902A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Epson EP-902A Ink Pad Counter Reset – Quick Steps

1. Step 1: Prepare a Windows PC + USB cable and connect Epson EP-902A directly. Keep Internet enabled for validation.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson EP-902A.
3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EP-902A.

Most Epson EP-902A waste counter resets finish in ~1–2 minutes.

System Requirements

• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC

Common Fixes

• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Restart printer and PC, then try again.
• Temporarily disable VPN/proxy if validation fails.

FAQ