Epson XP-860 Ink Pad Counter Reset Guide

Epson XP-860 Waste Ink Counter Reset

The Epson XP-860 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson XP-860 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson XP-860 Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson XP-860 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson XP-860 Printing

  1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-860 via USB (Wi-Fi reset is not supported).
  2. Paso 2: Run Wic Reset Connect as Administrator and confirm Epson XP-860 is detected.
  3. Paso 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-860.
Buy Reset Key ⬇️ Download Wic Reset Connect Instrucciones

Most Epson XP-860 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset

If the Printer Is Not Detected

  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.
  • Restart printer and PC, then try again.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-860 – Waste Ink Counter Reset using Wic Reset Connect.

Carro de la compra