Epson XP-605 Waste Ink Counter Reset

The Epson XP-605 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-605 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-605 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson XP-605 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Step-by-Step: Epson XP-605 Waste Counter Reset

1. Paso 1: Prepare a Windows PC + USB cable and connect Epson XP-605 directly. Keep Internet enabled for validation.
2. Paso 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-605 appears in the device list.
3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson XP-605 to finalize.

Most Epson XP-605 waste counter resets finish in ~1–2 minutes.

What You Need

• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC

If the Printer Is Not Detected

• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.
• Close Epson Status Monitor or other printer utilities.
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).

Frequently Asked Questions