Fix Epson XP-725 Service Required – Waste Counter Reset

Epson XP-725 Waste Ink Counter Reset

The Epson XP-725 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-725 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-725 Show ‘Service Required’?

Most Epson XP-725 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Three Steps to Restore Epson XP-725 Printing

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-725 via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-725.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson XP-725 to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson XP-725 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-725 – Waste Ink Counter Reset using Wic Reset Connect.