Model-specific reset guide
Epson WorkForce 310 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson WorkForce 310 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson WorkForce 310
An ink pad message is a maintenance safeguard. It indicates that Epson WorkForce 310 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson WorkForce 310. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WorkForce 310
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for WorkForce 310 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WorkForce 310 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 310.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WorkForce 310 is not detected
- Install the original Epson driver for WorkForce 310; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson WorkForce 310 reset FAQ
Can I reset Epson WorkForce 310 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Restore Epson WorkForce 310
Use the model-specific steps above to reset Epson WorkForce 310 with a stable connection and a valid key.