How to Reset Epson WF-2631 Waste Ink Counter

Epson WF-2631 Waste Ink Counter Reset

If your Epson WF-2631 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson WF-2631 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson WF-2631 Waste Ink Counter

Most Epson WF-2631 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson WF-2631 Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2631 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2631.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2631 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson WF-2631 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson WF-2631 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart