Epson TX213 Waste Ink Counter Reset

If your Epson TX213 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson TX213 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson TX213 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson TX213 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Epson TX213 Ink Pad Counter Reset – Quick Steps

1. Step 1: Connect Epson TX213 to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson TX213.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson TX213.

Most Epson TX213 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key

If the Printer Is Not Detected

• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Temporarily disable VPN/proxy if validation fails.
• Run the app as Administrator.

FAQ