Model-specific reset guide
Epson RX590 Reset Waste Ink Counter
Epson RX590 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Understanding the Epson RX590 waste ink warning
An ink pad message is a maintenance safeguard. It indicates that Epson RX590 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson RX590. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson RX590
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for RX590 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson RX590 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX590.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson RX590 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Install the original Epson driver for RX590; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson RX590 reset FAQ
Does Epson RX590 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson RX590 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson RX590
A direct USB connection, the correct driver and a valid key are all you need to reset Epson RX590.