How to Reset Epson R390 Waste Ink Counter

Epson R390 Waste Ink Counter Reset

If your Epson R390 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson R390 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson R390 Stops Printing (Waste Counter Limit)

Most Epson R390 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson R390 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Connect Epson R390 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson R390.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson R390 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson R390 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson R390 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart