How to Reset Epson Photo 1390 Waste Ink Counter

Epson Photo 1390 Waste Ink Counter Reset

The Epson Photo 1390 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson Photo 1390 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson Photo 1390 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson Photo 1390 waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson Photo 1390 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson Photo 1390 directly. Keep Internet enabled for validation.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson Photo 1390 is detected.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson Photo 1390.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson Photo 1390 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson Photo 1390 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart