How to Reset Epson NX127 Waste Ink Counter

Epson NX127 Waste Ink Counter Reset

If your Epson NX127 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX127 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson NX127 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson NX127 waste counter reset in minutes.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson NX127 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson NX127 directly. Keep Internet enabled for validation.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson NX127 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson NX127 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson NX127 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson NX127 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart