Model-specific reset guide
Epson ME-80W Reset Waste Ink Counter
If your Epson ME-80W has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Why Epson ME-80W stops printing
Epson ME-80W uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson ME-80W. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ME-80W
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for ME-80W and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ME-80W to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ME-80W.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ME-80W is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for ME-80W; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson ME-80W reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson ME-80W
Follow the verified sequence for Epson ME-80W, then restart the printer and continue your work.