Epson ME-570 Waste Ink Counter Reset

The Epson ME-570 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson ME-570 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson ME-570 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ME-570 waste counter reset in minutes.

Common Symptoms

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Three Steps to Restore Epson ME-570 Printing

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson ME-570 via USB (Wi-Fi reset is not supported).
Step 2: Run Wic Reset Connect as Administrator and confirm Epson ME-570 is detected.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson ME-570.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson ME-570 waste counter resets finish in ~1–2 minutes.

FAQ

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson ME-570 – Waste Ink Counter Reset using Wic Reset Connect.