Epson L606 Waste Ink Counter Reset

When the Epson L606 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson L606 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson L606 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson L606 waste counter reset in minutes.

Common Symptoms

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Epson L606 Ink Pad Counter Reset – Quick Steps

Step 1: Connect Epson L606 to a Windows computer with a stable Internet connection using a USB cable.
Step 2: Run Wic Reset Connect as Administrator and confirm Epson L606 is detected.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L606.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson L606 waste counter resets finish in ~1–2 minutes.

Before You Begin

Stable Internet connection during reset
Valid Wic Reset Connect reset key
Windows 7/8/10/11 PC
USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

Try another USB cable (some cables are charge-only).
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Temporarily disable VPN/proxy if validation fails.
Use a direct USB connection (avoid hubs).

Frequently Asked Questions

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L606 – Waste Ink Counter Reset using Wic Reset Connect.