Epson L3255 Waste Ink Counter Reset

Epson L3255 Waste Ink Counter Reset

The Epson L3255 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3255 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson L3255 Stops Printing (Waste Counter Limit)

Most Epson L3255 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Reset Epson L3255 Waste Ink Counter in 3 Steps

  1. Step 1: Connect Epson L3255 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3255 appears in the device list.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson L3255 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson L3255 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson L3255 – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart