Reset Epson L220 Waste Ink Counter in Minutes

Epson L220 Waste Ink Counter Reset

The Epson L220 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L220 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson L220 Stops Printing (Waste Counter Limit)

Most Epson L220 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Three Steps to Restore Epson L220 Printing

Step 1: Connect Epson L220 to a Windows computer with a stable Internet connection using a USB cable.
Step 2: Run Wic Reset Connect as Administrator and confirm Epson L220 is detected.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L220.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson L220 waste counter resets finish in ~1–2 minutes.

What You Need

Windows 7/8/10/11 PC
Valid Wic Reset Connect reset key
USB connection required (Wi-Fi reset not supported)
Stable Internet connection during reset

Frequently Asked Questions

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson L220 – Waste Ink Counter Reset using Wic Reset Connect.