Epson L1236 Waste Ink Counter Reset

If your Epson L1236 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L1236 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L1236 Waste Ink Counter

Most Epson L1236 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Epson L1236 Ink Pad Counter Reset – Quick Steps

1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson L1236 via USB (Wi-Fi reset is not supported).
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L1236.
3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L1236.

Most Epson L1236 waste counter resets finish in ~1–2 minutes.

System Requirements

• Valid Wic Reset Connect reset key
• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Close Epson Status Monitor or other printer utilities.
• Restart printer and PC, then try again.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.

Frequently Asked Questions