Epson EP-903A Waste Ink Counter Reset

The Epson EP-903A delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson EP-903A accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson EP-903A Show ‘Service Required’?

Most Epson EP-903A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Step-by-Step: Epson EP-903A Waste Counter Reset

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-903A via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson EP-903A.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson EP-903A.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson EP-903A waste counter resets finish in ~1–2 minutes.

Common Fixes

Close Epson Status Monitor or other printer utilities.
Temporarily disable VPN/proxy if validation fails.
Run the app as Administrator.
Use a direct USB connection (avoid hubs).
Try another USB cable (some cables are charge-only).

Frequently Asked Questions

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson EP-903A – Waste Ink Counter Reset using Wic Reset Connect.