Epson BX305FW Waste Ink Counter Reset

Epson BX305FW Waste Ink Counter Reset

The Epson BX305FW is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson BX305FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson BX305FW Ink Pad Counter Warning?

Most Epson BX305FW waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Three Steps to Restore Epson BX305FW Printing

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson BX305FW via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson BX305FW.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson BX305FW to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson BX305FW waste counter resets finish in ~1–2 minutes.

What You Need

  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Common Fixes

  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.
  • Restart printer and PC, then try again.
  • Temporarily disable VPN/proxy if validation fails.
  • Use a direct USB connection (avoid hubs).

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson BX305FW – Waste Ink Counter Reset using Wic Reset Connect.

Shopping Cart