Epson XP-255 Waste Ink Counter Reset

Epson XP-255 Waste Ink Counter Reset

The Epson XP-255 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson XP-255 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-255 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-255 waste counter reset in minutes.

Step-by-Step: Epson XP-255 Waste Counter Reset

  1. Βήμα 1: Connect Epson XP-255 to a Windows computer with a stable Internet connection using a USB cable.
  2. Βήμα 2: Έναρξη Wic Reset Connect in Administrator mode and wait until Epson XP-255 appears in the device list.
  3. Βήμα 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-255.
Buy Reset Key ⬇️ Λήψη Wic Reset Connect Οδηγίες

Most Epson XP-255 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)

Troubleshooting

  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.
  • Temporarily disable VPN/proxy if validation fails.
  • Run the app as Administrator.

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-255 – Waste Ink Counter Reset using Wic Reset Connect.

Καλάθι Αγορών