Epson XP-205 Waste Ink Counter Reset
The Epson XP-205 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
A waste ink counter in the Epson XP-205 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Why the Epson XP-205 Stops Printing (Waste Counter Limit)
A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-205 waste counter reset in minutes.
Typical Signs
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Three Steps to Restore Epson XP-205 Printing
- Βήμα 1: Prepare a Windows PC + USB cable and connect Epson XP-205 directly. Keep Internet enabled for validation.
- Βήμα 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-205.
- Βήμα 3: Paste the reset key, click Reset, and after completion power-cycle Epson XP-205.
Most Epson XP-205 waste counter resets finish in ~1–2 minutes.
System Requirements
- Windows 7/8/10/11 PC
- Valid Wic Reset Connect reset key
- Stable Internet connection during reset
- USB connection required (Wi-Fi reset not supported)
Troubleshooting
- Restart printer and PC, then try again.
- Try another USB cable (some cables are charge-only).
- Temporarily disable VPN/proxy if validation fails.
- Run the app as Administrator.
- Close Epson Status Monitor or other printer utilities.
FAQ
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson XP-205 – Waste Ink Counter Reset using Wic Reset Connect.