Epson WF-2521 Waste Ink Counter Reset
The Epson WF-2521 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
A waste ink counter in the Epson WF-2521 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
What Causes the Epson WF-2521 Ink Pad Counter Warning?
A service visit is often unnecessary. Wic Reset Connect allows a safe Epson WF-2521 waste counter reset in minutes.
Typical Signs
- ‘Service Required’ / service life message in driver or utility
- Maintenance/support code (varies by model/driver)
- Printing stops after cleaning cycles
- Warning repeats after restarting the printer
Three Steps to Restore Epson WF-2521 Printing
- Βήμα 1: Connect Epson WF-2521 to a Windows computer with a stable Internet connection using a USB cable.
- Βήμα 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2521.
- Βήμα 3: Paste the reset key, click Reset, and after completion power-cycle Epson WF-2521.
Most Epson WF-2521 waste counter resets finish in ~1–2 minutes.
System Requirements
- Valid Wic Reset Connect reset key
- USB connection required (Wi-Fi reset not supported)
- Stable Internet connection during reset
- Windows 7/8/10/11 PC
If the Printer Is Not Detected
- Close Epson Status Monitor or other printer utilities.
- Use a direct USB connection (avoid hubs).
- Restart printer and PC, then try again.
- Run the app as Administrator.
- Try another USB cable (some cables are charge-only).
FAQ
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Guide prepared for Epson WF-2521 – Waste Ink Counter Reset using Wic Reset Connect.