Reset Epson ET-4550 Waste Ink Counter in Minutes

Epson ET-4550 Waste Ink Counter Reset

The Epson ET-4550 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson ET-4550 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson ET-4550 Ink Pad Counter Warning?

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson ET-4550 waste counter reset in minutes.

Epson ET-4550 Ink Pad Counter Reset – Quick Steps

Βήμα 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-4550 via USB (Wi-Fi reset is not supported).
Βήμα 2: Έναρξη Wic Reset Connect in Administrator mode and wait until Epson ET-4550 appears in the device list.
Βήμα 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-4550.

Buy Reset Key ⬇️ Λήψη Wic Reset Connect Οδηγίες

Most Epson ET-4550 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

Temporarily disable VPN/proxy if validation fails.
Restart printer and PC, then try again.
Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Use a direct USB connection (avoid hubs).

Frequently Asked Questions

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Guide prepared for Epson ET-4550 – Waste Ink Counter Reset using Wic Reset Connect.