Fix Epson XP-406 Service Required – Waste Counter Reset

Epson XP-406 Waste Ink Counter Reset

The Epson XP-406 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson XP-406 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson XP-406 Waste Ink Counter

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson XP-406 waste counter reset in minutes.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson XP-406 Printing

  1. Schritt 1: Connect Epson XP-406 to a Windows computer with a stable Internet connection using a USB cable.
  2. Schritt 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-406.
  3. Schritt 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-406.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson XP-406 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

If the Printer Is Not Detected

  • Run the app as Administrator.
  • Restart printer and PC, then try again.
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-406 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb