Fix Epson TX135 Service Required – Waste Counter Reset

Epson TX135 Waste Ink Counter Reset

The Epson TX135 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson TX135 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson TX135 Waste Ink Counter

Most Epson TX135 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson TX135 Printing

  1. Schritt 1: Prepare a Windows PC + USB cable and connect Epson TX135 directly. Keep Internet enabled for validation.
  2. Schritt 2: Start Wic Reset Connect in Administrator mode and wait until Epson TX135 appears in the device list.
  3. Schritt 3: Paste the reset key, click Reset, and after completion power-cycle Epson TX135.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson TX135 waste counter resets finish in ~1–2 minutes.

System Requirements

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson TX135 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb