How to Reset Epson PX-535F Waste Ink Counter

Epson PX-535F Waste Ink Counter Reset

The Epson PX-535F delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

The Epson PX-535F tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson PX-535F Show ‘Service Required’?

With Wic Reset Connect, you can reset the Epson PX-535F waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson PX-535F Ink Pad Counter Reset – Quick Steps

  1. Schritt 1: Connect Epson PX-535F to a Windows computer with a stable Internet connection using a USB cable.
  2. Schritt 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson PX-535F.
  3. Schritt 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson PX-535F.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson PX-535F waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson PX-535F – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb