Fix Epson L1250 Service Required – Waste Counter Reset

Epson L1250 Waste Ink Counter Reset

When the Epson L1250 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

A waste ink counter in the Epson L1250 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson L1250 Ink Pad Counter Warning?

Most Epson L1250 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson L1250 Printing

  1. Schritt 1: Use a Windows PC (7–11) with Internet access. Connect Epson L1250 via USB (Wi-Fi reset is not supported).
  2. Schritt 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson L1250.
  3. Schritt 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson L1250.
Buy Reset Key ⬇️ Download Wic Reset Connect Anweisungen

Most Epson L1250 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

If the Printer Is Not Detected

  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson L1250 – Waste Ink Counter Reset using Wic Reset Connect.

Warenkorb